A friendly guide to wavelets
| Hi-index | 0.00 |
Large-eddy simulation (LES) of transitional separating-reattaching flow on a two-dimensional square surface mounted obstacle and a forward facing step has been performed using a dynamic sub-grid scale model. The Reynolds number based on the uniform inlet velocity and the obstacle/step height is 4.5 × 103. The mean LES results for both the obstacle and step flow compare reasonably well with the available experimental and DNS data. The flow structures upstream of the surface-mounted obstacle (referred to hereafter as obstacle) and the forward-facing step (referred to hereafter as FFS) consist of unstable two-dimensional structures and coherent rib-shaped structures. These structures with the aid of 3D streamline visualisation strongly indicate that the upstream separation bubble is a closed one rather than an open one in the sense that there is little evidence to suggest that there is fluid injection from the upstream separation region into the downstream separated region for the two geometries. The spectra and time history for the velocities and pressure fields at locations immediately upstream of the obstacle and FFS (including the recirculation region) were analysed using both the Fourier and wavelet transforms and revealed the unsteady nature of the recirculation region upstream of the obstacle and FFS. The transition process has been elucidated using both 2D and 3D flow visualisation of the flow. In both geometries (obstacle and FFS), the separated boundary layer downstream of the leading edge shows 2D nature and roll-up shortly downstream of the separation line leading to 2D K-H rolls to be shed from the leading edge. Coherent structures such as the λ-shaped and rib-like vortices commonly associated with a flat plate boundary layer and also found in the separated-reattached flow of a blunt leading edge plate aligned horizontally to a flow are not common in the separated-reattached flow over the obstacle and FFS.