Comparison of multiple linear regression and artificial neural network in developing the objective functions of the orthopaedic screws

  • Authors:

  • Ching-Chi Hsu;Jinn Lin;Ching-Kong Chao

  • Affiliations:

  • Graduate Institute of Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan, ROC;Department of Orthopedic Surgery, National Taiwan University Hospital, Taipei 100, Taiwan, ROC;Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan, ROC

  • Venue:
  • Computer Methods and Programs in Biomedicine
  • Year:
  • 2011

Quantified Score

Hi-index 0.00

Visualization

Abstract

Optimizing the orthopaedic screws can greatly improve their biomechanical performances. However, a methodical design optimization approach requires a long time to search the best design. Thus, the surrogate objective functions of the orthopaedic screws should be accurately developed. To our knowledge, there is no study to evaluate the strengths and limitations of the surrogate methods in developing the objective functions of the orthopaedic screws. Three-dimensional finite element models for both the tibial locking screws and the spinal pedicle screws were constructed and analyzed. Then, the learning data were prepared according to the arrangement of the Taguchi orthogonal array, and the verification data were selected with use of a randomized selection. Finally, the surrogate objective functions were developed by using either the multiple linear regression or the artificial neural network. The applicability and accuracy of those surrogate methods were evaluated and discussed. The multiple linear regression method could successfully construct the objective function of the tibial locking screws, but it failed to develop the objective function of the spinal pedicle screws. The artificial neural network method showed a greater capacity of prediction in developing the objective functions for the tibial locking screws and the spinal pedicle screws than the multiple linear regression method. The artificial neural network method may be a useful option for developing the objective functions of the orthopaedic screws with a greater structural complexity. The surrogate objective functions of the orthopaedic screws could effectively decrease the time and effort required for the design optimization process.