Robotics and Autonomous Systems
Dynamic identification of a redundantly actuated parallel manipulator
ROBIO'09 Proceedings of the 2009 international conference on Robotics and biomimetics
A GJK-based approach to contact force feasibility and distribution for multi-contact robots
Robotics and Autonomous Systems
On the maximal singularity-free ellipse of planar 3-RP R parallel mechanisms via convex optimization
Robotics and Computer-Integrated Manufacturing
| Hi-index | 0.00 |
In cable-driven parallel manipulators (CPMs), cables can perform only under tension, and therefore, redundant actuation, which can be provided by redundant limbs, is needed to maintain the cable tensions. By optimizing the distribution of the forces in the cables and the redundant limbs, the average size of actuators can be reduced resulting in lower cost. Optimizing the force distribution in CPMs requires consideration for the inequality constraints imposed on the cable forces as a result of the unilateral driving property of the cables. In this study, a projection method is presented to calculate optimum solutions for the actuators force distribution in CPMs. Two solutions are presented: 1) a minimum-norm solution that minimizes the 2-norm of all forces in the cables and redundant limbs and 2) a solution that minimizes the 2-norm of the forces in the cables only. The optimization problem is formulated as a projection on an intersection of convex sets and the Dykstra's projection method is used to obtain the solutions. This method is successfully applied to a 3-DOF CPM.