CASES '09 Proceedings of the 2009 international conference on Compilers, architecture, and synthesis for embedded systems
Discrete-dopant-induced timing fluctuation and suppression in nanoscale CMOS circuit
IEEE Transactions on Circuits and Systems II: Express Briefs
| Hi-index | 0.03 |
As CMOS technology is scaled down toward the nanoscale regime, drastically growing leakage currents and variations in device characteristics are becoming two important design challenges. Traditionally, the device-design methodology is based on finding the device parameters which minimize the leakage current while providing a minimum saturation current for the transistor. This methodology may change when variations are accounted for design. In this paper, a novel device optimization methodology is presented that incorporates variability awareness into the device-design flow such that the designed device satisfies desired bounds on total leakage, saturation current, and intrinsic delay under parameter variabilities. The technique locates the maximum-yield rectangular cube in the 5-D feasible space composed of oxide-thickness, gate-length, and channel-doping profile parameters. The center of this cube is considered as the maximum-yield design point with the highest immunity against variations. By using the methodology, four high-performance (HP) and low-power devices in 90-nm technology and one HP device in 65 nm have been designed. Monte Carlo simulations have been done to investigate the devices' performance and power metric variations and to verify their yield maximality.