1---8 GHz high efficiency single-stage travelling wave power amplifier

  • Authors:

  • Mustafa Sayginer;Metin Yazgi;H. Hakan Kuntman;Bal S. Virdee

  • Affiliations:

  • Department of Electronics and Communication Engineering, Faculty of Electrical and Electronics Engineering, Istanbul Technical University, Maslak, Istanbul, Turkey 34469;Department of Electronics and Communication Engineering, Faculty of Electrical and Electronics Engineering, Istanbul Technical University, Maslak, Istanbul, Turkey 34469;Department of Electronics and Communication Engineering, Faculty of Electrical and Electronics Engineering, Istanbul Technical University, Maslak, Istanbul, Turkey 34469;Faculty of Computing, Centre for Communications Technology, London Metropolitan University, London, UK N7 8DB

  • Venue:
  • Analog Integrated Circuits and Signal Processing
  • Year:
  • 2013

Quantified Score

Hi-index 0.00

Visualization

Abstract

This paper describes a Class-A/AB wideband power amplifier that comprises of a single-stage transistor travelling wave structure in which capacitive coupling and frequency dependent lossy artificial-line are employed at the input of the active device. The proposed technique significantly enhances the amplifier's gain-bandwidth product, input match and gain flatness performance. To ensure the amplifier delivers a predefined power to the load over its entire operating band 2-to-8 GHz a broadband load-pull technique was applied at the output of the amplifier. To avoid reduction in the amplifier's bandwidth resulting from parasitic capacitive effects associated with the off-chip choke inductor a wideband RF choke was designed. The 1.31 脳 2.93 mm2 power amplifier was fabricated using 0.25 μm GaAs pHEMT MMIC process. The measurement results show that the proposed amplifier delivers an average P sat of 29.5 dBm and P out,1 dB of 26 dBm, and the corresponding PAE levels are 55 and 35 % for the P sat and P out,1 dB, respectively.