The Effect of On-Off Scheduling to the Required Transmit Power in Systems with Fast Power Control

  • Authors:
  • Jyri Hämäläinen;Risto Wichman

  • Affiliations:
  • Networks, Nokia, Oulu, Finland FI-90651;Signal Processing Laboratory, Helsinki University of Technology, Hut, Finland FI-02015

  • Venue:
  • Wireless Personal Communications: An International Journal
  • Year:
  • 2005

Quantified Score

Hi-index 0.00

Visualization

Abstract

Physical layer channel-aware scheduling may significantly improve coverage and throughput of IP based services in wireless cellular networks, and the feasibility of such schedulers is actively studied within 3G and 4G systems. A channel-aware scheduler requires access to instantaneous channel state information in order to direct transmission to users with favorable channel conditions. In frequency division duplex (FDD) systems, this requires a fast feedback channel between mobile and base stations, and the overhead of the feedback control channel should be kept as low as possible.In this paper, we study the effect of control channel overhead to on-off scheduling (OOS) when fast transmit power control is applied in data and control channels. On-off scheduling is a simple channel-aware scheduling algorithm, where transmission to a user is suspended if the transmit power exceeds a given threshold. On-off scheduling is applied on the data channel while control channel is always on so that the scheduler is able to obtain channel state information from active users. The gain of OOS strongly depends on the power ratio between control and data channels, and increased interference due to control signaling and decreased interference due to channel-aware scheduling should be jointly considered in system design. Gains in the required transmit power are translated into gains in coverage and capacity assuming WCDMA parameters, and the results can be applied, e.g., when designing scheduling algorithms and corresponding signaling formats for WCDMA uplink.