Microwave Mobile Communications
Microwave Mobile Communications
Influence of the human activity on wide-band characteristics of the 60 GHz indoor radio channel
IEEE Transactions on Wireless Communications
Exploiting the 60 GHz band for local wireless multimedia access: prospects and future directions
IEEE Communications Magazine
Propagation measurements and models for wireless communications channels
IEEE Communications Magazine
Statistical analysis of measured impulse response functions of 2.0 GHz indoor radio channels
IEEE Journal on Selected Areas in Communications
Modeling the statistical time and angle of arrival characteristics of an indoor multipath channel
IEEE Journal on Selected Areas in Communications
Spatial and temporal characteristics of 60-GHz indoor channels
IEEE Journal on Selected Areas in Communications
A new statistical wideband spatio-temporal channel model for 5-GHz band WLAN systems
IEEE Journal on Selected Areas in Communications
Protection of video packets over a wireless rayleigh fading link: FEC versus ARQ
EURASIP Journal on Advances in Signal Processing
Millimeter-wave soldier-to-soldier communications for covert battlefield operations
IEEE Communications Magazine
A simulation study of CSMA/CA performance in 60 GHz WPANs
GLOBECOM'09 Proceedings of the 28th IEEE conference on Global telecommunications
Performance analysis of synchronization frame based interference mitigation in 60 GHz WPANs
IEEE Communications Letters
A dual-band architecture for multi-gbps communication in 60 GHz multi-hop networks
Proceedings of the 2010 ACM international workshop on mmWave communications: from circuits to networks
Hi-index | 0.00 |
Extensive measurements are conducted in room environments at 60 GHz to analyze the channel characteristics for various channel configurations. Channel parameters retrieved from measurements are presented and analyzed based on generic channel models. Particularly, a simple single-cluster model is applied for the parameter retrieval and performance evaluation. By this model, power delay profiles are simply described by a K-factor, a root-mean-squared delay spread, and a shape parameter. The considered channels are configured with the combination of omnidirectional, fan-beam, and pencil-beam antennas at transmitter and receiver sides. Both line-of-sight (LOS) and non-LOS (NLOS) channels are considered. Further, to evaluate the transmission performance, we analyze the link budget in the considered environments, then design and simulate an OFDM system with a data rate of 2 Gbps to compare the bit-error-rate (BER) performance by using the measured and modeled channels. Both coded and uncoded OFDM systems are simulated. It is observed that the BER performance agrees well for the measured and modeled channels. In addition, directive configurations can provide sufficient link margins and BER performance for high data rate communications. To increase the coverage and performance in the NLOS area, it is preferable to apply directive antennas.