Infinity-norm acceleration minimization of robotic redundant manipulators using the LVI-based primal-dual neural network

Authors:
Yunong Zhang;Jiangping Yin;Binghuang Cai
Affiliations:
Department of Electronics and Communication Engineering, Sun Yat-Sen University, Guangzhou 510275, China;Department of Electronics and Communication Engineering, Sun Yat-Sen University, Guangzhou 510275, China;Department of Electronics and Communication Engineering, Sun Yat-Sen University, Guangzhou 510275, China
Venue:
Robotics and Computer-Integrated Manufacturing
Year:
2009

Citing 7
Cited 4

Redundant arm kinematic control with recurrent loop

Neural Networks
Modelling and Control of Robot Manipulators

Modelling and Control of Robot Manipulators
A new neural network for solving nonlinear projection equations

Neural Networks
A dual neural network for constrained joint torque optimization of kinematically redundant manipulators

IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics
A unified quadratic-programming-based dynamical system approach to joint torque optimization of physically constrained redundant manipulators

IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics
Recurrent neural networks for minimum infinity-norm kinematic control of redundant manipulators

IEEE Transactions on Systems, Man, and Cybernetics, Part A: Systems and Humans
A dual neural network for redundancy resolution of kinematically redundant manipulators subject to joint limits and joint velocity limits

IEEE Transactions on Neural Networks

Remedy scheme and theoretical analysis of joint-angle drift phenomenon for redundant robot manipulators

Robotics and Computer-Integrated Manufacturing
Different-level two-norm and infinity-norm minimization to remedy joint-torque instability/divergence for redundant robot manipulators

Robotics and Autonomous Systems
Neural network-based nonlinear tracking control of kinematically redundant robot manipulators

Mathematical and Computer Modelling: An International Journal
Acceleration-level repetitive motion planning of redundant planar robots solved by a simplified LVI-based primal-dual neural network

Robotics and Computer-Integrated Manufacturing

Quantified Score

Hi-index	0.00

Visualization

Abstract

Kinematically redundant manipulators admit an infinite number of inverse kinematic solutions and hence the optimization of different performance measures corresponding to various task requirements must be considered. Joint accelerations of these mechanisms are usually computed by optimizing various criteria defined using the two-norm of acceleration vectors in the joint space. However, in formulating the optimization measures for computing the inverse kinematics of redundant arms, this paper investigates the use of the infinity norm of joint acceleration (INAM) (also known as the minimum-effort solution). The infinity norm of a vector is its maximum absolute value component and hence its minimization implies the determination of a minimum-effort solution as opposed to the minimum-energy criterion associated with the two-norm. Moreover, the new scheme reformulates the task as the online solution to a quadratic programming problem and incorporates three levels of joint physical limits, thus keeping the acceleration within a given range and avoiding the torque-instability problem. In addition, since the new scheme adopts the LVI-based primal-dual neural network, it does not entail any matrix inversion or matrix-matrix multiplication, which was embodied in other's researches with expensive O(n^3) operations. This new proposed QP-based dynamic system scheme is simulated based on the PUMA560 robot arm.