Vibration-to-electric energy conversion
IEEE Transactions on Very Large Scale Integration (VLSI) Systems - Special issue on low power electronics and design
Energy Scavenging for Wireless Sensor Networks: With Special Focus on Vibrations
Energy Scavenging for Wireless Sensor Networks: With Special Focus on Vibrations
Microelectronic Engineering
An AA-Sized Vibration-Based Microgenerator for Wireless Sensors
IEEE Pervasive Computing
A study of low level vibrations as a power source for wireless sensor nodes
Computer Communications
Self-tuning electrostatic energy-harvester IC
IEEE Transactions on Circuits and Systems II: Express Briefs
IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Hi-index | 0.00 |
The self-powering, long-lasting, and functional features of embedded wireless microsensors appeal to an ever-expanding application space in monitoring, control, and diagnosis for military, commercial, industrial, space, and biomedical applications. Extended operational life, however, is difficult to achieve when power-intensive functions like telemetry draw whatever little energy is available from energy-storage microdevices like thin-film lithium-ion batteries and/or microscale fuel cells. Harvesting ambient energy overcomes this deficit by continually replenishing the energy reservoir and indefinitely extending system lifetime. In this paper, a prototyped circuit that precharges, detects, and synchronizes to a variable voltage-constrained capacitor verifies experimentally that harvesting energy electrostatically from vibrations is possible. Experimental results show that, on average (excluding gate-drive and control losses), the system harvests 9.7 nJ/cycle by investing 1.7 nJ/cycle, yielding a net energy gain of approximately 8 nJ/cycle at an average of 1.6 µW (in typical applications) for every 200 pF variation. Projecting and including reasonable gate-drive and controller losses reduces the net energy gain to 6.9 nJ/cycle at 1.38 µW.