Three uses for springs in legged locomotion
International Journal of Robotics Research
IROS '95 Proceedings of the International Conference on Intelligent Robots and Systems-Volume 1 - Volume 1
International Journal of Robotics Research
Design considerations for a biologically inspired compliant four-legged robot
ROBIO'09 Proceedings of the 2009 international conference on Robotics and biomimetics
| Hi-index | 0.00 |
Existing legged robots lack energy-efficiency, performance and adaptivity when confronted with situations that animals cope with on a routine basis. Bridging the gap between artificial and natural systems requires not only better sensorimotor and learning capabilities but also a corresponding motion apparatus and intelligent actuators. Current actuators with online adaptable compliance pose high requirements on software control algorithms and sensor systems. We present a novel feedforward trajectory shaping technique that allows for a virtual stiffness change of a deployed series elastic actuator with low energy requirements. The performance limits of the approach are assessed by comparing to an active and a passive compliant methodology in simulation. For this purpose we use a 2-degrees-of-freedom arm with and without periodic load representing a 2- segmented leg with and without ground contact. The simulation results indicate that the approach is well suited for the use in legged robots.