Online power-aware routing in wireless Ad-hoc networks
Proceedings of the 7th annual international conference on Mobile computing and networking
IEEE Internet Computing
Transmission power control in MAC protocols for wireless sensor networks
MSWiM '05 Proceedings of the 8th ACM international symposium on Modeling, analysis and simulation of wireless and mobile systems
A power control MAC protocol for ad hoc networks
Wireless Networks
ATPC: adaptive transmission power control for wireless sensor networks
Proceedings of the 4th international conference on Embedded networked sensor systems
Understanding the limitations of transmit power control for indoor wlans
Proceedings of the 7th ACM SIGCOMM conference on Internet measurement
Robust topology control for indoor wireless sensor networks
Proceedings of the 6th ACM conference on Embedded network sensor systems
Transmission power control in body area sensor networks for healthcare monitoring
IEEE Journal on Selected Areas in Communications - Special issue on body area networking: Technology and applications
Energy consumption of multi-hop wireless networks under throughput constraints and range scaling
ACM SIGMOBILE Mobile Computing and Communications Review
Hi-index | 0.00 |
Today, many wireless devices are mobile and battery powered. Based on the fact that battery capacity is still limited, energy saving is an important issue in wireless communication. Meanwhile, the number of wireless devices continues to increase and this creates interference problems between wireless devices. In this paper, we look at transmission power control and propose a mechanism that tries to achieve minimum energy consumption or emission under any circumstance. Lower transmission power levels may result in more retransmissions, but in total, energy consumption or emission still can be reduced in many scenarios. To evaluate the performance of our mechanism, we used real wireless channels in an indoor environment to carry out measurements. The measurement results indicate that a significant amount of energy consumption or emission reduction can be achieved for the transmitter in most scenarios compared to using a fixed transmission power level for all packets.