Power-efficient calibration and reconfiguration for on-chip optical communication

Authors:
Yan Zheng;Peter Lisherness;Ming Gao;Jock Bovington;Shiyuan Yang;Kwang-Ting Cheng
Affiliations:
Tsinghua University, Beijing, China and University of California, Santa Barbara, CA;University of California, Santa Barbara, CA;University of California, Santa Barbara, CA;University of California, Santa Barbara, CA;Tsinghua University, Beijing, China;University of California, Santa Barbara, CA
Venue:
DATE '12 Proceedings of the Conference on Design, Automation and Test in Europe
Year:
2012

Citing 6
Cited 0

Virtual hierarchies to support server consolidation

Proceedings of the 34th annual international symposium on Computer architecture
Corona: System Implications of Emerging Nanophotonic Technology

ISCA '08 Proceedings of the 35th Annual International Symposium on Computer Architecture
Photonic Networks-on-Chip for Future Generations of Chip Multiprocessors

IEEE Transactions on Computers
Global On-Chip Coordination at Light Speed

IEEE Design & Test
The role of optics in future high radix switch design

Proceedings of the 38th annual international symposium on Computer architecture
Reliability Modeling and Management of Nanophotonic On-Chip Networks

IEEE Transactions on Very Large Scale Integration (VLSI) Systems

Quantified Score

Hi-index	0.00

Visualization

Abstract

On-chip optical communication infrastructure has been proposed to provide higher bandwidth and lower power consumption for the next-generation high performance multi-core systems. Online calibration of these optical components is essential to building a robust optical communication system, which is highly sensitive to process and thermal variation. However, the power consumption of existing tuning methods to properly calibrate the optical devices would be prohibitively high. We propose two calibration and reconfiguration techniques that can significantly reduce the worst case tuning power of a ring-resonator-based optical modulator: 1) a channel re-mapping scheme, with sub-channel redundant resonators, which results in significant reduction in the amount of required tuning, typically within the capability of voltage based tuning, and 2) a dynamic feedback calibration mechanism used to compensate for both process and thermal variations of the resonators. Simulation results demonstrate that these techniques can achieve a 48X reduction in tuning power - less than 10W for a network with 1-million ring resonators.