Kinematic calibration of the parallel Argos mechanism

  • Authors:

  • Peter Vischer;Reymond Clavel

  • Affiliations:

  • Institute of Robotic Systems, Swiss Federal Institute of Technology – 1015 Lausanne (Switzerland);Institute of Robotic Systems, Swiss Federal Institute of Technology – 1015 Lausanne (Switzerland)

  • Venue:
  • Robotica
  • Year:
  • 2000

Quantified Score

Hi-index 0.00

Visualization

Abstract

This paper deals with the kinematic calibration of the Argos mechanism which is a novel, spherical parallel structure having 3 rotational degrees of freedom. Its design is based on 3 actuators carrying a pantograph each which are connected to the end-effector by means of 3 spherical joints. Two different calibration models are introduced. The first one models mechanical deviations in all parts except for the spherical joints and the assumption that they are moving on a perfect circle (“model 27”). The second model considers only deviations which affects the orientation of the end-effector but not its position assuming that the mechanism remains spherical (“model 9”). A measurement set-up allows to measure the full pose (position and orientation) of the end-effector with respect to its base. These measurement data are used to identify the parameters of the two calibration models resulting in an accuracy improvement of RMS (root mean squares errors) of a factor of 5.3 for the orientation and a factor of 3.4 for the prediction of the position.