Parameter variations and impact on circuits and microarchitecture
Proceedings of the 40th annual Design Automation Conference
Reduction of Parametric Failures in Sub-100-nm SRAM Array Using Body Bias
IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Proceedings of the 17th IEEE/ACM international symposium on Low-power electronics and design
Theory and Applications of Robust Optimization
SIAM Review
| Hi-index | 0.00 |
SRAM cell design is driven by the need to satisfy static noise margin, write margin and read current margin (RCM) over all cells in the array in an energy-efficient manner. These constraints determine both the minimum cell size and supply voltage. RCM is set by the maximum read access time over the array. The randomness of transistor threshold voltages, and thus read times, makes maximum read time follow extreme order statistics, specifically, the Gumbel distribution which is characterized by long tails. Thus, the margin specification needs to be met at the high sigma corners in order to reach acceptable yield, resulting in oversizing and increased VDD. In this work, we demonstrate that a reduced-area bitcell design is achievable by reducing the impact of intra-array randomness through a new architecture that employs an adaptive voltage scheme in a partitioned SRAM array. The key idea is to be able to shift empirical distributions (realizations) of read time in a set of rows that form a single partition to meet the target. Because the partition is smaller than the whole array, the tail of the Gumbel distribution is significantly reduced. The adaptive voltage tuning policy is driven by the worst partition access time. For the blocks whose delay violates access time constraints, a higher voltage is selected out of the available set to gain yield, otherwise voltage is reduced for power saving. This permits smaller cell area and lower VDD at identical yield. The cost of adaptivity is in generation and routing of a small number (in our experiments, four) voltage levels and the area of one-per-partition set of PMOS switches. We demonstrate that through the voltage tuning architecture we propose, it is possible to obtain mean power consumption reduction on average by 21% iso-area. Alternatively, bitcell area can be reduced on average by 7% iso-power compared to the existing design strategy.