Improvements on the design and implementation of DVB-S2 LDPC decoders

  • Authors:
  • K.C. Cinnati Loi;Seok-Bum Ko

  • Affiliations:
  • Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada;Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada

  • Venue:
  • Computers and Electrical Engineering
  • Year:
  • 2011

Quantified Score

Hi-index 0.00

Visualization

Abstract

The architecture of a field-programmable gate-array (FPGA) implementation of a low-density parity-check (LDPC) decoder for the Digital Video Broadcasting - Second Generation via Satellite (DVB-S2) standard is presented. Algorithms are devised to systematically apply the values given in DVB-S2 to implement a memory mapping scheme, which allows for 360 functional units (FUs) to be used in decoding and supports both normal and short frames. A design of a parity-check module (PCM) is presented that verifies the parity-check equations of the LDPC codes. Furthermore, a special characteristic of five of the codes defined in DVB-S2 and their influence on the decoder design is discussed. Two versions of the LDPC decoder are synthesized for two families of FPGAs. The results show that the decoder presented uses fewer hardware resources than a DVB-S2 LDPC decoder found in the current literature that also uses FPGA, while improving the maximum frequency of the decoder.