Modeling and control of a new robotic deburring system

Authors:
Jae H. Chung;Changhoon Kim
Affiliations:
Department of Mechanical Engineering, Stevens Institute of Technology, Castle Point on Hudson, Hoboken, N. J. 07030 (USA);Department of Mechanical Engineering, Stevens Institute of Technology, Castle Point on Hudson, Hoboken, N. J. 07030 (USA)
Venue:
Robotica
Year:
2006

Citing 5
Cited 0

Historical perspective and state of the art in robot force control

International Journal of Robotics Research
Nonlinear control systems: an introduction (2nd ed.)

Nonlinear control systems: an introduction (2nd ed.)
A survey of models, analysis tools and compensation methods for the control of machines with friction

Automatica (Journal of IFAC)
Robot Dynamics and Control

Robot Dynamics and Control
Nonlinear feedback and computer control of robot arms

Nonlinear feedback and computer control of robot arms

Quantified Score

Hi-index	0.00

Visualization

Abstract

This paper discusses the modeling and control of a robotic manipulator with a new deburring tool, which integrates two pneumatic actuators to take advantage of a double cutting action. A coordination control method is developed by decomposing the robotic deburring system into two subsystems; the arm and the deburring tool. A decentralized control approach is pursued, in which suitable controllers were designed for the two subsystems in the coordination scheme. In simulation, three different tool configurations are considered: rigid, single pneumatic and integrated pneumatic tools. A comparative study is performed to investigate the deburring performance of the deburring arm with the different tools. Simulation results show that the developed robotic deburring system significantly improves the accuracy of the deburring operation.