A survey on geometrical reconstruction as a core technology to sketch-based modeling

Authors:
Pedro Company;Ana Piquer;Manuel Contero;Ferran Naya
Affiliations:
Universitat Jaume I, Department of Mechanical Engineering and Construction, Campus del Riu Sec., E-12071 Castellon, Spain;Universitat Jaume I, Department of Mechanical Engineering and Construction, Campus del Riu Sec., E-12071 Castellon, Spain;Polytecnic University of Valencia, ETSII-DEGI, Camino de Vera s/n, E-46022 Valencia, Spain;Polytecnic University of Valencia, ETSII-DEGI, Camino de Vera s/n, E-46022 Valencia, Spain
Venue:
Computers and Graphics
Year:
2005

Citing 34
Cited 20

Machine interpretation of line drawings

Machine interpretation of line drawings
Reconstruction of 3D objects form orthographic projections

Computer Graphics Forum
Automatic reconstruction of 3D solid objects from 2D orthographic views

Pattern Recognition
Emulating the human interpretation of line-drawings as three-dimensional objects

International Journal of Computer Vision
The problem of user interface in geometric modelling

Computers in Industry
On the automatic reconstruction of a 3D object's constructive solid geometry representation from its 2D projection line drawing

On the automatic reconstruction of a 3D object's constructive solid geometry representation from its 2D projection line drawing
An optimization-based approach to the interpretation of single line drawings as 3D wire frames

International Journal of Computer Vision
Designing solid objects using interactive sketch interpretation

I3D '92 Proceedings of the 1992 symposium on Interactive 3D graphics
Applying constraints to enforce users' intentions in free-hand 2-D sketches

Intelligent Systems Engineering
Hand line drawing interpretation as three-dimensional objects

Signal Processing - Intelligent systems for signal and image understanding
Sketching as a solid modeling tool

SMA '95 Proceedings of the third ACM symposium on Solid modeling and applications
Creating solid models from single 2D sketches

SMA '95 Proceedings of the third ACM symposium on Solid modeling and applications
The complexity of understanding line drawings of Origami scenes

International Journal of Computer Vision
SKETCH: an interface for sketching 3D scenes

SIGGRAPH '96 Proceedings of the 23rd annual conference on Computer graphics and interactive techniques
Interactive beautification: a technique for rapid geometric design

Proceedings of the 10th annual ACM symposium on User interface software and technology
Teddy: a sketching interface for 3D freeform design

Proceedings of the 26th annual conference on Computer graphics and interactive techniques
An automatic beautifier for drawings and illustrations

SIGGRAPH '85 Proceedings of the 12th annual conference on Computer graphics and interactive techniques
Graphical input through machine recognition of sketches

SIGGRAPH '76 Proceedings of the 3rd annual conference on Computer graphics and interactive techniques
Recognition of three-dimensional objects from orthographic views

SIGGRAPH '76 Proceedings of the 3rd annual conference on Computer graphics and interactive techniques
Experimental evaluation of an on-line scribble recognizer

Pattern Recognition Letters
Overcoming Superstrictness in Line Drawing Interpretation

IEEE Transactions on Pattern Analysis and Machine Intelligence
A System for Constructing Boundary Representation Solid Models from a Two-Dimensional Sketch

GMP '00 Proceedings of the Geometric Modeling and Processing 2000
Solid model input through orthographic views

SIGGRAPH '83 Proceedings of the 10th annual conference on Computer graphics and interactive techniques
A step towards reconstruction of 3-D CAD models from engineering drawings

ICDAR '95 Proceedings of the Third International Conference on Document Analysis and Recognition (Volume 1) - Volume 1
Interpreting a 3D object from a rough 2D line drawing

VIS '90 Proceedings of the 1st conference on Visualization '90
Interpreting Line Drawings of Objects with K-Vertices

GMP '04 Proceedings of the Geometric Modeling and Processing 2004
Interactive modelling from sketches using spherical implicit functions

AFRIGRAPH '04 Proceedings of the 3rd international conference on Computer graphics, virtual reality, visualisation and interaction in Africa
Making the most of using depth reasoning to label line drawings of engineering objects

SM '04 Proceedings of the ninth ACM symposium on Solid modeling and applications
Decomposition of a visual scene into three-dimensional bodies

AFIPS '68 (Fall, part I) Proceedings of the December 9-11, 1968, fall joint computer conference, part I
Reconstruction of 3D interacting solids of revolution from 2D orthographic views

Computer-Aided Design
Technical Section: An optimisation-based reconstruction engine for 3D modelling by sketching

Computers and Graphics
Fleshing out projections

IBM Journal of Research and Development
CIGRO: a minimal instruction set calligraphic interface for sketch-based modeling

ICCSA'03 Proceedings of the 2003 international conference on Computational science and its applications: PartIII
Mathematical Structures of Line Drawings of Polyhedrons-Toward Man-Machine Communication by Means of Line Drawings

IEEE Transactions on Pattern Analysis and Machine Intelligence

CrossSketch: freeform surface modeling with details

SBIM '07 Proceedings of the 4th Eurographics workshop on Sketch-based interfaces and modeling
An interactive sketching method for 3D object modeling

Proceedings of the 3rd international conference on Digital Interactive Media in Entertainment and Arts
Technical Section: Extracting a polyhedron from a single-view sketch: Topological construction of a wireframe sketch with minimal hidden elements

Computers and Graphics
Computer-aided sketching as a tool to promote innovation in the new product development process

Computers in Industry
From sketch to solid: an algebraic cross-section criterion for the realizability of a wireframe sketch

Computing - Geometric Modelling, Dagstuhl 2008
A new algorithm for finding faces in wireframes

Computer-Aided Design
A method for reconstructing sketched polyhedral shapes with rounds and fillets

SG'10 Proceedings of the 10th international conference on Smart graphics
"3D reconstruction problem": an automated procedure

AMERICAN-MATH'11/CEA'11 Proceedings of the 2011 American conference on applied mathematics and the 5th WSEAS international conference on Computer engineering and applications
Single-view sketch based modeling

Proceedings of the Eighth Eurographics Symposium on Sketch-Based Interfaces and Modeling
3D reconstruction of polyhedral objects from single perspective projections using cubic corner

3D Research
Digitalization of paper sketches integration of the non digital draft

DPPI '11 Proceedings of the 2011 Conference on Designing Pleasurable Products and Interfaces
A new hybrid method for 3D object recovery from 2D drawings and its validation against the cubic corner method and the optimisation-based method

Computer-Aided Design
A study of usability of sketching tools aimed at supporting prescriptive sketches

SBM'06 Proceedings of the Third Eurographics conference on Sketch-Based Interfaces and Modeling
Sketching faces

SBM'08 Proceedings of the Fifth Eurographics conference on Sketch-Based Interfaces and Modeling
A hybrid-optimization method for assessing the realizability of wireframe sketches

3D Research
Cost estimation of custom hoses from STL files and CAD drawings

Computers in Industry
3D Object Modeling using Sketches

Information Resources Management Journal
Intent-driven model synthesis

Proceedings of the 6th International Symposium on Visual Information Communication and Interaction
From sketches to CAM models: perceiving pockets and steps in single-view wireframe sketches of polyhedral shapes

Proceedings of the 2013 ACM conference on Pervasive and ubiquitous computing adjunct publication
3D geometry reconstruction from orthographic views: A method based on 3D image processing and data fitting

Computers in Industry

Quantified Score

Hi-index	0.00

Visualization

Abstract

In this work, the background and evolution of three-dimensional reconstruction of line drawings during the last 30 years is discussed. A new general taxonomy is proposed to make apparent and discuss the historical evolution of geometrical reconstruction and their challenges. The evolution of geometrical reconstruction from recovering know-how stored in engineering drawings to sketch-based modeling for helping in the first steps of conceptual design purposes, and the current challenges of geometrical reconstruction are discussed too.