Non-distorted texture mapping for sheared triangulated meshes
Proceedings of the 25th annual conference on Computer graphics and interactive techniques
Multiresolution signal processing for meshes
Proceedings of the 26th annual conference on Computer graphics and interactive techniques
Proceedings of the 27th annual conference on Computer graphics and interactive techniques
Consistent mesh parameterizations
Proceedings of the 28th annual conference on Computer graphics and interactive techniques
Texture mapping progressive meshes
Proceedings of the 28th annual conference on Computer graphics and interactive techniques
Constrained texture mapping for polygonal meshes
Proceedings of the 28th annual conference on Computer graphics and interactive techniques
Controllable morphing of compatible planar triangulations
ACM Transactions on Graphics (TOG)
Optimally cutting a surface into a disk
Proceedings of the eighteenth annual symposium on Computational geometry
Hybrid meshes: multiresolution using regular and irregular refinement
Proceedings of the eighteenth annual symposium on Computational geometry
A generic approach to free form surface generation
Proceedings of the seventh ACM symposium on Solid modeling and applications
Cut-and-paste editing of multiresolution surfaces
Proceedings of the 29th annual conference on Computer graphics and interactive techniques
Pointshop 3D: an interactive system for point-based surface editing
Proceedings of the 29th annual conference on Computer graphics and interactive techniques
Proceedings of the 29th annual conference on Computer graphics and interactive techniques
Least squares conformal maps for automatic texture atlas generation
Proceedings of the 29th annual conference on Computer graphics and interactive techniques
Improved bi-Laplacian mesh fairing
Mathematical Methods for Curves and Surfaces
Smoothing an overlay grid to minimize linear distortion in texture mapping
ACM Transactions on Graphics (TOG)
Signal-specialized parametrization
EGRW '02 Proceedings of the 13th Eurographics workshop on Rendering
Proceedings of the conference on Visualization '01
Nonlinear virtual colon unfolding
Proceedings of the conference on Visualization '01
Bounded-distortion piecewise mesh parameterization
Proceedings of the conference on Visualization '02
Consistent parametrization by quinary subdivision for remeshing and mesh metamorphosis
Proceedings of the 1st international conference on Computer graphics and interactive techniques in Australasia and South East Asia
Texture Mapping Using Surface Flattening via Multidimensional Scaling
IEEE Transactions on Visualization and Computer Graphics
Approximating Digital 3D Shapes by Rational Gaussian Surfaces
IEEE Transactions on Visualization and Computer Graphics
Generalized barycentric coordinates on irregular polygons
Journal of Graphics Tools
A Statistical Shape Model for the Liver
MICCAI '02 Proceedings of the 5th International Conference on Medical Image Computing and Computer-Assisted Intervention-Part II
One-to-one piecewise linear mappings over triangulations
Mathematics of Computation
Computer Aided Geometric Design
GRIN'01 No description on Graphics interface 2001
Dynamic remeshing and applications
SM '03 Proceedings of the eighth ACM symposium on Solid modeling and applications
Graph based topological analysis of tessellated surfaces
SM '03 Proceedings of the eighth ACM symposium on Solid modeling and applications
Geometry videos: a new representation for 3D animations
Proceedings of the 2003 ACM SIGGRAPH/Eurographics symposium on Computer animation
Tutte's barycenter method applied to isotopies
Computational Geometry: Theory and Applications - Special issue on the thirteenth canadian conference on computational geometry - CCCG'01
Matchmaker: constructing constrained texture maps
ACM SIGGRAPH 2003 Papers
Spherical parametrization and remeshing
ACM SIGGRAPH 2003 Papers
Globally smooth parameterizations with low distortion
ACM SIGGRAPH 2003 Papers
Fundamentals of spherical parameterization for 3D meshes
ACM SIGGRAPH 2003 Papers
ACM SIGGRAPH 2003 Papers
Proceedings of the 2003 Eurographics/ACM SIGGRAPH symposium on Geometry processing
Domain decomposition for multiresolution analysis
Proceedings of the 2003 Eurographics/ACM SIGGRAPH symposium on Geometry processing
Multiresolution Model Generation with Geometry and Texture
VSMM '01 Proceedings of the Seventh International Conference on Virtual Systems and Multimedia (VSMM'01)
Hierarchical Least Squares Conformal Map
PG '03 Proceedings of the 11th Pacific Conference on Computer Graphics and Applications
Graphical Models - Special issue on SMI 2002
Transforming 3D mesh surfaces into images by parameterization
Integrated image and graphics technologies
Crest Lines for Surface Segmentation and Flattening
IEEE Transactions on Visualization and Computer Graphics
Fair morse functions for extracting the topological structure of a surface mesh
ACM SIGGRAPH 2004 Papers
ACM SIGGRAPH 2004 Papers
Optimal Global Conformal Surface Parameterization
VIS '04 Proceedings of the conference on Visualization '04
Lifting curve parameterization methods to isosurfaces
Computer Aided Geometric Design - Special issue: Geometric modeling and processing 2004
Feature-based surface parameterization and texture mapping
ACM Transactions on Graphics (TOG)
On the optimality of spectral compression of mesh data
ACM Transactions on Graphics (TOG)
Journal of Computer Science and Technology - Special issue on computer graphics and computer-aided design
IEEE Transactions on Visualization and Computer Graphics
Iso-charts: stretch-driven mesh parameterization using spectral analysis
Proceedings of the 2004 Eurographics/ACM SIGGRAPH symposium on Geometry processing
Signal-specialized parameterization for piecewise linear reconstruction
Proceedings of the 2004 Eurographics/ACM SIGGRAPH symposium on Geometry processing
Proceedings of the 2004 Eurographics/ACM SIGGRAPH symposium on Geometry processing
Proceedings of the 2005 ACM symposium on Solid and physical modeling
Texture transfer during shape transformation
ACM Transactions on Graphics (TOG)
ABF++: fast and robust angle based flattening
ACM Transactions on Graphics (TOG)
Mean value coordinates for closed triangular meshes
ACM SIGGRAPH 2005 Papers
MC*: Star Functions for Marching Cubes
Proceedings of the 14th IEEE Visualization 2003 (VIS'03)
Image Based Flow Visualization for Curved Surfaces
Proceedings of the 14th IEEE Visualization 2003 (VIS'03)
Robust spherical parameterization of triangular meshes
Computing - Geometric modelling dagstuhl 2002
Harmonic functions for quadrilateral remeshing of arbitrary manifolds
Computer Aided Geometric Design - Special issue: Geometry processing
IEEE Transactions on Visualization and Computer Graphics
Proceedings of the ACM symposium on Virtual reality software and technology
Surface mesh segmentation and smooth surface extraction through region growing
Computer Aided Geometric Design
Meshless Thin-Shell Simulation Based on Global Conformal Parameterization
IEEE Transactions on Visualization and Computer Graphics
Discrete one-forms on meshes and applications to 3D mesh parameterization
Computer Aided Geometric Design
Interactive decal compositing with discrete exponential maps
ACM SIGGRAPH 2006 Papers
Graphical Models - Special issue on SPM 05
Visualization and Measurement of the Cortical Surface
Journal of Cognitive Neuroscience
A direct texture placement and editing interface
UIST '06 Proceedings of the 19th annual ACM symposium on User interface software and technology
Mean value coordinates for arbitrary planar polygons
ACM Transactions on Graphics (TOG)
Periodic global parameterization
ACM Transactions on Graphics (TOG)
Progressive buffers: view-dependent geometry and texture LOD rendering
ACM SIGGRAPH 2006 Courses
Geometric modeling based on triangle meshes
ACM SIGGRAPH 2006 Courses
Planar parameterization for closed 2-manifold genus-1 meshes
SM '04 Proceedings of the ninth ACM symposium on Solid modeling and applications
Meshing genus-1 point clouds using discrete one-forms
Computers and Graphics
Woven model based geometric design of elastic medical braces
Computer-Aided Design
Families of cut-graphs for bordered meshes with arbitrary genus
Graphical Models
Surface parameterization via aligning optimal local flattening
Proceedings of the 2007 ACM symposium on Solid and physical modeling
Extracting feature lines from unstructured meshes using a model feature map
Integrated Computer-Aided Engineering
Turbine blade temperature transfer using the load surface method
Computer-Aided Design
Setting the boundary free: a composite approach to surface parameterization
SGP '05 Proceedings of the third Eurographics symposium on Geometry processing
Progressive buffers: view-dependent geometry and texture LOD rendering
SGP '05 Proceedings of the third Eurographics symposium on Geometry processing
Rectangular multi-chart geometry images
SGP '06 Proceedings of the fourth Eurographics symposium on Geometry processing
Adaptive triangular element generation and optimization-based smoothing: Part 2. On the surface
Advances in Engineering Software
Cloth simulation and collision detection using geometry images
AFRIGRAPH '07 Proceedings of the 5th international conference on Computer graphics, virtual reality, visualisation and interaction in Africa
Mesh parameterization methods and their applications
Foundations and Trends® in Computer Graphics and Vision
Cycle bases of graphs and sampled manifolds
Computer Aided Geometric Design
Quasi-isometric parameterization for texture mapping
Pattern Recognition
Boolean surfaces with shape constraints
Computer-Aided Design
Quasi-isometric parameterization for texture mapping
Pattern Recognition
Texture mapping on 3D surfaces using clustering-based cutting paths
International Journal of Computational Science and Engineering
Direct sampling on surfaces for high quality remeshing
Proceedings of the 2008 ACM symposium on Solid and physical modeling
Pattern computation for compression garment
Proceedings of the 2008 ACM symposium on Solid and physical modeling
A multiple B-Spline representation for progressive 3D mesh compression
ICCOM'05 Proceedings of the 9th WSEAS International Conference on Communications
Parameterization of Quadrilateral Meshes
ICCS '07 Proceedings of the 7th international conference on Computational Science, Part II
Parameterization of 3D Surface Patches by Straightest Distances
ICCS '07 Proceedings of the 7th international conference on Computational Science, Part II
Edutainment '08 Proceedings of the 3rd international conference on Technologies for E-Learning and Digital Entertainment
A genus oblivious approach to cross parameterization
Computer Aided Geometric Design
Edge based parameterization for tubular meshes
VRCAI '08 Proceedings of The 7th ACM SIGGRAPH International Conference on Virtual-Reality Continuum and Its Applications in Industry
Mesh parameterization: theory and practice
ACM SIGGRAPH ASIA 2008 courses
Direct sampling on surfaces for high quality remeshing
Computer Aided Geometric Design
Spherical parameterization of marching cubes IsoSurfaces based upon nearest neighbor coordinates
Journal of Computer Science and Technology
Harmonic functions for quadrilateral remeshing of arbitrary manifolds
Computer Aided Geometric Design - Special issue: Geometry processing
Discrete one-forms on meshes and applications to 3D mesh parameterization
Computer Aided Geometric Design
Surface mesh segmentation and smooth surface extraction through region growing
Computer Aided Geometric Design
Lifting curve parameterization methods to isosurfaces
Computer Aided Geometric Design
Freeform surface flattening based on fitting a woven mesh model
Computer-Aided Design
A physically based method for triangulated surface flattening
Computer-Aided Design
Technical Section: A novel constrained texture mapping method based on harmonic map
Computers and Graphics
AMT '09 Proceedings of the 5th International Conference on Active Media Technology
Fast Spherical Mapping for Genus-0 Meshes
ISVC '09 Proceedings of the 5th International Symposium on Advances in Visual Computing: Part II
Spectral conformal parameterization
SGP '08 Proceedings of the Symposium on Geometry Processing
A local/global approach to mesh parameterization
SGP '08 Proceedings of the Symposium on Geometry Processing
Teniæ coli detection from colon surface: extraction of anatomical markers for virtual colonoscopy
ISVC'07 Proceedings of the 3rd international conference on Advances in visual computing - Volume Part I
Parameterizing marching cubes isosurfaces with natural neighbor coordinates
GMP'08 Proceedings of the 5th international conference on Advances in geometric modeling and processing
Technical Section: Mesh reconstruction by meshless denoising and parameterization
Computers and Graphics
Mesh parameterization based on one-step inverse forming
Computer-Aided Design
Evaluating deformation patterns of the thoracic aorta in gated CTA sequences
ISBI'10 Proceedings of the 2010 IEEE international conference on Biomedical imaging: from nano to Macro
Mesh-based morphing method for rapid hull form generation
Computer-Aided Design
SMI 2011: Full Paper: Template-based quadrilateral meshing
Computers and Graphics
SMI 2011: Full Paper: Parallel computation of spherical parameterizations for mesh analysis
Computers and Graphics
ITEM: inter-texture error measurement for 3D meshes
Proceedings of the 16th International Conference on 3D Web Technology
Information Sciences: an International Journal
The best G1 cubic and G2 quartic Bézier approximations of circular arcs
Journal of Computational and Applied Mathematics
Feature-based 3D morphing based on geometrically constrained spherical parameterization
Computer Aided Geometric Design
Geometrical analysis for assistive medical device design
CIS'04 Proceedings of the First international conference on Computational and Information Science
3D triangular mesh parametrization using locally linear embedding
CAIP'05 Proceedings of the 11th international conference on Computer Analysis of Images and Patterns
Efficient parameterization of 3d point-sets using recursive dynamic base surfaces
PCI'05 Proceedings of the 10th Panhellenic conference on Advances in Informatics
CGI'06 Proceedings of the 24th international conference on Advances in Computer Graphics
A new constrained texture mapping method
ICEC'05 Proceedings of the 4th international conference on Entertainment Computing
ACCV'06 Proceedings of the 7th Asian conference on Computer Vision - Volume Part II
Geometry compression using spherical wavelet
ICAT'06 Proceedings of the 16th international conference on Advances in Artificial Reality and Tele-Existence
An introduction to guided and polar surfacing
MMCS'08 Proceedings of the 7th international conference on Mathematical Methods for Curves and Surfaces
Feature-Constrained texturing system for 3d models
KES'05 Proceedings of the 9th international conference on Knowledge-Based Intelligent Information and Engineering Systems - Volume Part III
New trends in digital shape reconstruction
IMA'05 Proceedings of the 11th IMA international conference on Mathematics of Surfaces
Surface simplification with semantic features using texture and curvature maps
ICCSA'05 Proceedings of the 2005 international conference on Computational Science and Its Applications - Volume Part III
Locally linear isometric parameterization
EMMCVPR'05 Proceedings of the 5th international conference on Energy Minimization Methods in Computer Vision and Pattern Recognition
Information Sciences: an International Journal
Straightest paths on meshes by cutting planes
GMP'06 Proceedings of the 4th international conference on Geometric Modeling and Processing
Geometric fairing of irregular meshes for free-form surface design
Computer Aided Geometric Design
How to walk your dog in the mountains with no magic leash
Proceedings of the twenty-eighth annual symposium on Computational geometry
Embedding a triangular graph within a given boundary
Computer Aided Geometric Design
Computing Extremal Quasiconformal Maps
Computer Graphics Forum
Meshing point clouds using spherical parameterization
SPBG'04 Proceedings of the First Eurographics conference on Point-Based Graphics
Technical note: GPU-optimized indirect scalar displacement mapping
Computer-Aided Design
A complete framework for 3D mesh morphing
Proceedings of the 11th ACM SIGGRAPH International Conference on Virtual-Reality Continuum and its Applications in Industry
Invariant surface-based shape descriptor for dynamic surface encoding
ACCV'12 Proceedings of the 11th Asian conference on Computer Vision - Volume Part I
An efficient and collision-free hole-filling algorithm for orthodontics
The Visual Computer: International Journal of Computer Graphics
SMI 2013: Efficient computation of constrained parameterizations on parallel platforms
Computers and Graphics
Footwear bio-modelling: An industrial approach
Computer-Aided Design
Computer Aided Geometric Design
Hi-index | 0.00 |